Drilless easy to use and install system. Comes complete w/ mounting hardware and do it yourself instructions.

1. Remove Rt or Lt cheek padding (your option)
2. Wrap the "Loop" section around earbud jack
3. Use supplied Zip Tie to attach Helmet kits “Y block” to helmets chin strap “D Ring” (chin strap to helmet attaching location)
4. Attach the smaller "Hook" section to the inside of your helmet between the cheek padding (removed) and helmet itself
5. Attach the "Loop" section to the 'Hook" section
6. Allow the earbud connection point to rest just below the bottom of your helmet lip
7. Replace the cheek pad and you’re done!